Enter a comma separated list of user names.
Enter a comma separated list of user names.
waluyo's picture

Waluyo Adi Siswanto

( PhD, ROYAL MELBOURNE INSTITUTE OF TECHNOLOGY (RMIT), Australia)

Associate Professor

Email: waluyo@umkt.ac.id
Department: Mechanical Engineering
Research Group: Desain Dan Teknonologi Manufaktur (DeTeM)

CV Online: http://karya.umkt.ac.id/cv-staff?name=waluyo
Enter a comma separated list of user names.
Member (No.1001502),
      Society of Automotive Engineers (SAE) - Australasia.
Senior Member (No.80338460),
      International Association of Computer Science and Information Technology (IACSIT).
Member (No.101586),
      International Association of Engineers (IAENG).

Education

Enter a comma separated list of user names.
Year awarded Qualification University Country
2001
Ph.D.
Aerospace Engineering
Royal Melbourne Institute of Technology (RMIT) Australia
1997
M. Eng (res)
Mechanical Engineering
Royal Melbourne Institute of Technology (RMIT) Australia
1990
Insinyur (Ir)
Mechanical Engineering
Universitas Gadjah Mada (UGM) Indonesia

A. PUBLICATIONS


Journal Articles

Displaying 56 records.
Enter a comma separated list of user names.
Publication Year Articles
2008 1
2009 1
2011 3
2012 7
2013 7
2014 11
2015 4
2016 7
2017 7
2018 6
2019 2
56
Enter a comma separated list of user names.
No Journal Detail Index IF
1 Surendar A., Adi Siswanto W., Alijani M., Alhaifi K., Salmani M.
(2019) High-G drop effect on the creep-fatigue failure of SAC solder joints in BGA packages, Microsystem Technologies, Vol: -, , --, ISSN:9467076. (Published)
Web of Science (SCIE, SSCI) 1.513
2018
2 Mohd Joharudin N.F., Abdul Latif N., Mustapa M.S., Mansor M.N., Siswanto W.A., Murugesan J., Yusof F.
(2019) Effect of amorphous silica by rice husk ash on physical properties and microstructures of recycled aluminium chip AA7075, Materialwissenschaft und Werkstofftechnik, Vol: 50, 3, 283--288, ISSN:9335137. (Published)
Web of Science (SCIE, SSCI) 0.556
2018
3 Siswanto W.A., Abdullah M.S., Darmawan A.S.
(2018) Effect of humidity on the membrane vibration of musical instrument kompang, International Journal of Mechanical Engineering and Technology, Vol: 9, 6, 1233--1240, ISSN:9766340. (Published)
SCOPUS
4 Sarjito, Wijayanto A., Adi Siswanto W.
(2018) Sail position and notch-tail modification to reduce the drag of a mini submarine, International Journal of Mechanical Engineering and Technology, Vol: 9, 6, 515--522, ISSN:9766340. (Published)
SCOPUS
5 Supriyono, Wijianto, Effendy M., Siswanto W.A.
(2018) Elastoplastic analysis of plate with boundary element method, International Journal of Mechanical Engineering and Technology, Vol: 9, 6, 864--872, ISSN:9766340. (Published)
SCOPUS
6 Siswanto W.A., Syiddiq M.
(2018) Demonstration of comparison between goat skin and X-ray film membranes on traditional musical instrument kompang, Pertanika Journal of Science and Technology, Vol: 26, 2, 585--598, ISSN:1287680. (Published)
SCOPUS
7 Sarjito, Siswanto W.A., Jamaldi A., Yao Y.
(2018) Selecting nozzle arrangement of a chimney tower to reduce the temperature and to increase the entrainment mass flow, International Journal of Mechanical and Production Engineering Research and Development, Vol: 8, 6, 81--90, ISSN:22496890. (Published)
SCOPUS
8 Yusoff A.H.M., Salleh S.M., Abdullah M.E., Zaman I., Hani M.H.M., Siswanto W.A., Mahmud W.A.W.
(2018) Experimental evaluation of fish feeder machine controller system, International Journal of Integrated Engineering, Vol: 10, 8, 218--222, ISSN:2229838X. (Published)
SCOPUS
9 Muhd Nor N.H., Siswanto W.A., Ismail A.E., Mustapha A., Masek A., Hassan M.F., Yunos M.Z., Abdullah M.K., Md Jalil M.A.S., Tajudin S.A.A., Khalid A., Jamian S., Mohamad F.
(2017) Preface, IOP Conference Series: Materials Science and Engineering, Vol: 226, 1, --, ISSN:17578981. (Published)
SCOPUS
10 Siswanto W.A., Abdullah M.S.B.
(2017) Numerical tension adjustment of x-ray membrane to represent goat skin kompang, AIP Conference Proceedings, Vol: 1831, , --, ISSN:0094243X. (Published)
SCOPUS
11 Ismail A.E., Mohd Tobi A.L., Siswanto W.A.
(2017) Preface, IOP Conference Series: Materials Science and Engineering, Vol: 166, 1, --, ISSN:17578981. (Published)
SCOPUS
12 Azahari A., Siswanto W.A., Ngali M.Z., Salleh S.M., Yusup E.M.
(2017) Dynamic Simulation and Analysis of Human Walking Mechanism, IOP Conference Series: Materials Science and Engineering, Vol: 166, 1, --, ISSN:17578981. (Published)
SCOPUS
13 Siswanto W.A., Yoon C.C., Salleh S.M., Ngali M.Z., Yusup E.M.
(2017) Computational Modelling and Movement Analysis of Hip Joint with Muscles, IOP Conference Series: Materials Science and Engineering, Vol: 166, 1, --, ISSN:17578981. (Published)
SCOPUS
14 Firdaus M., Salleh S.M., Nawi I., Ngali Z., Siswanto W.A., Yusup E.M.
(2017) Preliminary Design on Screw Press Model of Palm Oil Extraction Machine, IOP Conference Series: Materials Science and Engineering, Vol: 166, 1, --, ISSN:17578981. (Published)
SCOPUS
15 Kaharuddin M.Z., Khairu Razak S.B., Kushairi M.I., Abd Rahman M.S., An W.C., Ngali Z., Siswanto W.A., Salleh S.M., Yusup E.M.
(2017) Biomechanics Analysis of Combat Sport (Silat) by Using Motion Capture System, IOP Conference Series: Materials Science and Engineering, Vol: 166, 1, --, ISSN:17578981. (Published)
SCOPUS
16 Siswanto W.A., Nagentrau M., Mohd Tobi A.L., Tamin M.N.
(2016) Prediction of plastic deformation under contact condition by quasi-static and dynamic simulations using explicit finite element analysis, Journal of Mechanical Science and Technology, Vol: 30, 11, 5093--5101, ISSN:1738494X. (Published)
Web of Science (SCIE, SSCI) 1.221
2018
17 Mohd Tobi A.L., Zaman I., Mustapa M.S., Siswanto W.A., Mahzan S.
(2016) Case study: Techniques for material characterization of brass tensile testing fracture sample, ARPN Journal of Engineering and Applied Sciences, Vol: 11, 16, 10128--10132, ISSN:18196608. (Published)
SCOPUS
18 Farid Husaini M., Md Salleh S., Ngali Z., Siswanto W.A.
(2016) Temperature decrement rate of bath tub water for ice bath therapy, ARPN Journal of Engineering and Applied Sciences, Vol: 11, 12, 7480--7484, ISSN:18196608. (Published)
SCOPUS
19 Nagentrau M., Siswanto W.A., Mohd Tobi A.L.
(2016) The influence of Linear Kinematic hardening and non-linear combined isotropic-kinematic hardening plasticity model on sliding contact, International Journal of Mechanical and Mechatronics Engineering, Vol: 16, 4, 83--88, ISSN:22272771. (Published)
SCOPUS
20 Nagentrau M., Siswanto W.A., Mohd Tobi A.L.
(2016) Predicting the sliding amplitude of plastic deformation in the reciprocating sliding contact, ARPN Journal of Engineering and Applied Sciences, Vol: 11, 4, 2266--2271, ISSN:18196608. (Published)
SCOPUS
21 Ngali M.Z., Ibrahim N.S.S., Md Salleh S., Siswanto W.A.
(2016) Single-camera motion capture system for netball team strategic tool, ARPN Journal of Engineering and Applied Sciences, Vol: 11, 14, 8653--8657, ISSN:18196608. (Published)
SCOPUS
22 Ngali M.Z., Abdul Razak S., Daud N.A., Md Salleh S., Siswanto W.A.
(2016) INLET-outlet arrangement effects on ice bath cooling system for athlete's injury recovery procedure, ARPN Journal of Engineering and Applied Sciences, Vol: 11, 18, 11198--11202, ISSN:18196608. (Published)
SCOPUS
23 Siswanto W.A., Nagentrau M., Mohd Tobi A.L.
(2015) Prediction of residual stress using explicit finite element method, Journal of Mechanical Engineering and Sciences, Vol: 9, , 1556--1570, ISSN:22894659. (Published)
SCOPUS
24 Paruka P., Siswanto W.A., Maleque M.A., Shah M.K.M.
(2015) Crashworthy capacity of a hybridized epoxy-glass fiber aluminum columnar tube using repeated axial resistive force, Journal of Mechanical Science and Technology, Vol: 29, 5, 1941--1953, ISSN:1738494X. (Published)
Web of Science (SCIE, SSCI) 1.221
2018
25 Siswanto W.A., Nagentrau M., Mohd Tobi A.L., Tamin M.N.
(2015) Contact pressure prediction comparison using implicit and explicit finite element methods and the validation with Hertzian theory, International Journal of Mechanical and Mechatronics Engineering, Vol: 15, 6, 1--8, ISSN:22272771. (Published)
SCOPUS
26 Mohsin M.L., Tobi A.L.M., Siswanto W.A., Tamin M.N.
(2015) Finite element analysis of stress intensity factor of pre-cracked coated substrate under contact sliding, Proceedings of the IEEE/CPMT International Electronics Manufacturing Technology (IEMT) Symposium, Vol: 2015-June, , --, ISSN:10898190. (Published)
SCOPUS
27 Anggono A.D., Siswanto W.A.
(2014) Simulation of ironing process for earring reduction in sheet metal forming, Applied Mechanics and Materials, Vol: 465-466, , 91--95, ISSN:16609336. (Published)
SCOPUS
28 Masrol S.R., Siswanto W.A.
(2014) Stress concentration analysis of plate with circular hole: Elasticity theory and finite element comparison, Applied Mechanics and Materials, Vol: 465-466, , 1385--1389, ISSN:16609336. (Published)
SCOPUS
29 Rani M.Z.M., Tobi A.L.M., Ismail A.E., Siswanto W.A., Saad A.A.
(2014) Investigation on the stress behaviour of coating-substrate interface under contact loading, Applied Mechanics and Materials, Vol: 465-466, , 1319--1323, ISSN:16609336. (Published)
SCOPUS
30 Ibrahim M.N., Siswanto W.A., Zaidi A.M.A.
(2014) Numerical study on failure process of aluminium plate subjected to normal impact by hemispherical projectiles, Applied Mechanics and Materials, Vol: 660, , 598--602, ISSN:16609336. (Published)
SCOPUS
31 Anggono A.D., Riyadi T.W.B., Siswanto W.A.
(2014) Dynamic explicit finite element code for U-bending simulation and springback prediction, Applied Mechanics and Materials, Vol: 660, , 337--341, ISSN:16609336. (Published)
SCOPUS
32 Nawi I., Siswanto W.A., Ismail A.E.
(2014) A study of auto pour in sand casting process, Applied Mechanics and Materials, Vol: 660, , 74--78, ISSN:16609336. (Published)
SCOPUS
33 Ibrahim M.N., Siswanto W.A., Zaidi A.M.A.
(2014) Numerical study of 2024 T3 aluminum plates subjected to impact and perforation, Journal of Mechanical Science and Technology, Vol: 28, 11, 4475--4482, ISSN:1738494X. (Published)
Web of Science (SCIE, SSCI) 1.221
2018
34 Siswanto W.A., Yun S.T., Utomo W.M.
(2014) Structural behavior of a ballasted small railway track under static and dynamic loadings, International Review on Modelling and Simulations, Vol: 7, 1, 59--64, ISSN:19749821. (Published)
SCOPUS
35 Siswanto W.A., Anggono A.D., Omar B., Jusoff K.
(2014) An alternate method to springback compensation for sheet metal forming, Scientific World Journal, Vol: 2014, , --, ISSN:23566140. (Published)
Web of Science (SCIE, SSCI) 1.219
2013
36 Siswanto W.A., Che Wahab W.M.A., Yahya M.N., Ismail A.E., Nawi I.
(2014) A platform for digital reproduction sound of traditional musical instrument Kompang, Applied Mechanics and Materials, Vol: 660, , 823--827, ISSN:16609336. (Published)
SCOPUS
37 Utomo W.M., Sim S.Y., Haron Z.A., Bohari A.A., Zin N.M., Ariff R.M., Siswanto W.A.
(2014) An improved DTC of an induction motor drive with neural network controller, International Journal of Mechanical and Mechatronics Engineering, Vol: 14, 2, 54--59, ISSN:22272771. (Published)
SCOPUS
38 Anggono A.D., Siswanto W.A., Omar B.
(2013) Springback prediction compensation and optimization for front side member in sheet metal forming using FEM simulation, Advanced Materials Research, Vol: 789, , 436--442, ISSN:10226680. (Published)
SCOPUS
39 Darmawan A.S., Siswanto W.A., Sujitno T.
(2013) Comparison of commercially pure titanium surface hardness improvement by plasma nitrocarburizing and ion implantation, Advanced Materials Research, Vol: 789, , 347--351, ISSN:10226680. (Published)
SCOPUS
40 Paruka P., Siswanto W.A.
(2013) Axial impact performance of aluminium thin cylindrical tube, Applied Mechanics and Materials, Vol: 315, , 1--5, ISSN:16609336. (Published)
SCOPUS
41 Tam L., Omar B., Siswanto W.A.
(2013) Review on anthropometric test dummy and computational modelling, Applied Mechanics and Materials, Vol: 315, , 640--644, ISSN:16609336. (Published)
SCOPUS
42 Ibrahim M.N., Siswanto W.A., Zaidi A.M.A.
(2013) Computational issues in the simulation of high speed ballistic impact: A Review, Applied Mechanics and Materials, Vol: 315, , 762--767, ISSN:16609336. (Published)
SCOPUS
43 Darmawan A.S., Siswanto W.A., Sujitno T.
(2013) The influence of plasma nitrocarburizing process temperature to commercially pure titanium surface hardness, Applied Mechanics and Materials, Vol: 315, , 700--704, ISSN:16609336. (Published)
SCOPUS
44 Darmawan A.S., Siswanto W.A., Sujitno T.
(2013) Surface modification of commercially pure titanium by plasma nitrocarburizing at different temperatures and duration process, Research Journal of Applied Sciences, Engineering and Technology, Vol: 5, 4, 1351--1357, ISSN:20407459. (Published)
SCOPUS
45 Siswanto W.A., Ibrahim M.N.
(2012) Computational kinematics sensitivity analysis of eccentric reciprocating slider mechanism, International Journal of Mathematical Models and Methods in Applied Sciences, Vol: 6, 3, 452--459, ISSN:19980140. (Published)
SCOPUS
46 Siswanto W.A., Tam L., Kasron M.Z.
(2012) Sound characteristics and sound prediction of the traditional musical instrument the three-rattle angklung, International Journal of Acoustics and Vibrations, Vol: 17, 3, 120--126, ISSN:10275851. (Published)
Web of Science (SCIE, SSCI) 0.578
2018
47 Anggono A.D., Siswanto W.A., Omar B.
(2012) Algorithm development and application of spring back compensation for sheet metal forming, Research Journal of Applied Sciences, Engineering and Technology, Vol: 4, 14, 2036--2045, ISSN:20407459. (Published)
SCOPUS
48 Siswanto W.A., Darmawan A.S.
(2012) Teaching finite element method of structural line elements assisted by open source FreeMat, Research Journal of Applied Sciences, Engineering and Technology, Vol: 4, 10, 1277--1286, ISSN:20407459. (Published)
SCOPUS
49 Siswanto W.A., Hua C.S.
(2012) Strength analysis of human skull on high speed impact, International Review of Mechanical Engineering, Vol: 6, 7, 1508--1514, ISSN:19708734. (Published)
SCOPUS
50 Siswanto W.A., Omar B., Shukri S.
(2012) Numerical investigation of hollow metal cross section profiles on Impact, Advanced Materials Research, Vol: 383-390, , 3241--3248, ISSN:10226680. (Published)
SCOPUS
51 Siswanto W.A., Sharafuddin R.Y., Paruka P.
(2012) High speed Impact characteristics of plastic material based on finite element simulation, Advanced Materials Research, Vol: 383-390, , 3229--3233, ISSN:10226680. (Published)
SCOPUS
52 Anggono A.D., Siswanto W.A., Omar B.
(2011) Hybrid die compensation method to accommodate springback error in sheet metal, AIP Conference Proceedings, Vol: 1383, , 1056--1063, ISSN:0094243X. (Published)
SCOPUS
53 Siswanto W.A., Ngui K.
(2011) Performance of triangular and square ionic lifter systems, Australian Journal of Basic and Applied Sciences, Vol: 5, 9, 1433--1438, ISSN:19918178. (Published)
SCOPUS
54 Anggono A.D., Siswanto W.A., Omar B.
(2011) Combined method of spring-forward and spring-back for die compensation acceleration, 2011 4th International Conference on Modeling, Simulation and Applied Optimization, ICMSAO 2011, Vol: , , --, ISSN: . (Published)
SCOPUS
55 Siswanto W.A., Omar B.
(2009) Die surface design optimization accommodating springback assisted by an automatic surface generator, International Journal of Material Forming, Vol: 2, SUPPL. 1, 797--800, ISSN:19606206. (Published)
Web of Science (SCIE, SSCI) 1.750
2018
56 Riyadi T.W.B., Siswanto W.A.
(2008) The use of Abaqus for teaching the development of cavity defects in forward extrusion processes, International Journal of Mechanical Engineering Education, Vol: 36, 3, 221--224, ISSN:3064190. (Published)
SCOPUS

Books

Displaying 3 records.
Enter a comma separated list of user names.
No Cover book Book Detail Involvement
1
Teori dan Aplikasi Dinamika Teknik dengan Contoh dalam SMath
Waluyo Adi Siswanto
(2018), ISBN:9786023611287, Muhammadiyah University Press.
Language: Bahasa Indonesia
purchase link
First author
2
Scientific book writing using LyX a front-end of LaTeX
Waluyo Adi Siswanto
(2011), ISBN:9789675457418, Penerbit UTHM Malaysia.
Language: English
purchase link
First author
3
Principles of Engineering Dynamics : Concise Theory and Applications
Waluyo Adi Siswanto
(2008), ISBN:9789832963769, Penerbit UTHM Malaysia.
Language: English
purchase link
First author

Chapter in Book

Displaying 1 records.
Enter a comma separated list of user names.
No Cover book Chapter in Book Involvement
1
Kata Pengantar
(Waluyo Adi Siswanto)
in
Iptek nasional pasca Habibie
( Nur Mahmudi Isma'il, Mulyanto )
2004, ISBN: 9796360535, Muhammadiyah University Press.
First author

Article in Proceedings

Enter a comma separated list of user names.

No conference proceedings records found.

Other Publications

Enter a comma separated list of user names.

No other publications found.


B. RESEARCH


Research

Displaying 17 records.
Enter a comma separated list of user names.
Involvement Involved as
Research member 11
Project leader 6
Enter a comma separated list of user names.
No Project Title Start End Involvement Category Funding
1 [FRGS 1547]
Correction On The Conventional Constitutive Formulation To Predict Three Dimensional Stress-state Of Deformation Behaviour In Commercial Aluminum Alloys Undergoing High Velocity Impacts
1/11/2015 31/10/2018 Research member International
(Malaysia)
2 [FRGS 1543]
A New Algorithm Formulation And Biomechanics Motion Analysis Setup For Malaysia's High Performance Athletes In Individual And Team Sports
1/11/2015 31/10/2018 Research member International
(Malaysia)
3 [UTHM Short Grant U119]
Development of autofeeder with pneumatic control systems to produce high glossy acrylic door panel at Taichi Tech Industry Sdn Bhd
14/10/2014 16/10/2016 Research member International
(Malaysia)
4 [FRGS 1483]
Pengurangan sisa makanan menggunakan teknik pengkomposan berasaskan teeknologi hijau
1/9/2014 31/8/2016 Research member International
(Malaysia)
5 [GIPS 809]
Surface hardening modelling and contact algorithm improvement for high performance finite element method in parallel computing
1/4/2015 31/3/2016 Project leader International
(Malaysia)
165,376,000
6 [GIPS U398]
FE analysis of fracture and delamination on coated subtrated
1/7/2015 31/3/2016 Research member International
(Malaysia)
7 [GIPS U292]
Developing A Numerical Model for X-Ray Kompang
1/5/2015 31/1/2016 Project leader International
(Malaysia)
30,770,000
8 [RACE 1441]
Characterisation of failure mechanism of a coated surface using finite element simulation method for a novel coating selection tool
1/12/2013 30/11/2015 Research member International
(Malaysia)
9 [FRGS 1424]
Investigation of kenaf fiber reinforced composites for automotive crash energy absorbing structures
13/12/2013 15/11/2015 Research member International
(Malaysia)
10 [FRGS 1420]
A new algorithm framework of granular fertiliser boom sprayer simulation for paddy field simulation
13/12/2013 15/11/2015 Research member International
(Malaysia)
11 [FRGS 1206]
Sound Characterisation of Traditional Musical Instrument Kompang to Reproduce Digital Synthesizer
1/4/2013 1/4/2015 Project leader International
(Malaysia)
246,500,000
12 [RAGS R010]
Modelling of elastoplastic damage constitutive model for plastic dynamic behavior in automotive and aerospace structures
15/12/2012 15/12/2014 Research member International
(Malaysia)
13 [RAGS R011]
Evaluation of novel plasticity type wear model for living prediction in aeroengine components
12/12/2012 14/12/2014 Research member International
(Malaysia)
14 [FRGS 748]
A new framework of hybrid springback compensation algorithm for high precision stamping part
1/9/2010 31/8/2012 Project leader International
(Malaysia)
119,884,000
15 [ScienceFund S015]
New Design Of Pure Titanium Metal On Metal Total Hip Replacement With Ion Implanted Wear Resistance Surface
1/1/2008 30/11/2010 Project leader International
(Malaysia)
490,960,000
16 [FRGS 557]
Development of robust method to accommodate springback distortion in in multistage sheet metal forming
1/11/2008 31/10/2010 Research member International
(Malaysia)
17 [UTHM Short Grant 506]
Influence of draw beads on the springback behavior of the benchmark problem NUMISHEET 2008
1/3/2008 30/7/2009 Project leader International
(Malaysia)
34,000,000
1,087,490,000

Innovation

Displaying 1 records.
Enter a comma separated list of user names.
No Type of Innovation and Commercialisation Year Description
1 Intelectual Property
EC00201825526
2018 Penerimaan Mahasiswa Baru-One Day Service (PMB-ODS), Intelectual Property Product, Member, No: EC00201825526.
Bana Handaga, Waluyo Adi Siswanto, Husni Thamrin, Fajar Suryawan, Gunawan Ariyanto, Arissa Aprilia Nurcahyani, Ginus Pandhu Setyawan, Eka Saputra Aji

C. SUPERVISION


Supervision

Displaying 55 records.
Enter a comma separated list of user names.
PhD
No Supervision Student Status
1 Supervisor
Agung Setyo Darmawan
Surface Treatment Numerical FEM Modelling for Biomechanics Application
In Progress
2 Supervisor
Mohd Norihan bin Ibrahim @ Tamrin
Nonlinear simulation development for blasting and impact application
Completed 2017
3 Supervisor
Agus Dwi Anggono (HD090048)
Combined Method for Die Compensation in Sheet Metal Forming
Completed 2014
Master by Research
No Supervision Student Status
1 Supervisor
Nagentrau A/L Muniandy (GD140086)
Plastic deformation prediction on coated substrate using explicit finite element method for novel coating selection tool
Completed 2017
2 Co- Supervisor
Mohamad Lokman bin Mohsin (HD130014)
Fretting investigation on metalsurface
Completed 2017
3 Supervisor
Muhammad Syiddiq Bin Abdullah (GD140113)
Developing Numerical Model for x-ray Kompang
Completed 2017
4 Co- Supervisor
Lina Tam (HD110119)
Development Model of Finite Element Model for Malaysian Female Anthropometric Dummy
Completed 2015
Master by Course
No Supervision Student Status
1 Supervisor
Hairul Mubarak Bin Hassim (GD110173)
Finite Element Analysis of General Three Dimensional Space Frame
Completed 2013
Bachelor
No Supervision Student Status
1 Supervisor
ATHIRAH BINTI AZAHARI (CD130195)
DYNAMIC SIMULATION AND ANALYSIS OF HUMAN WALKING MECHANISM
Completed 2017
2 Supervisor
AHMAD KHAIRUL KHAIR BIN MOHD YUSRI (CD130194)
VERIFICATION AND COMPARISON OF IMPACT BONE CASE STUDY IN IMPACT AND FEBIO
Completed 2017
3 Supervisor
Muhammad Azhar Bin Mohd Hanas (CD120038)
FINITE ELEMENT METHOD MODEL OF HUMAN FOOT FOR BIOMECHANICS RESEARCH
Completed 2016
4 Supervisor
Mohamad Akmal Bin Jamil (AD120136)
Investigation of human bone material properties to the bone crack behaviour on impact by using finite element analysis
Completed 2016
5 Supervisor
Wan Muhamad Asyraf Bin Wan Mohd Bakri (AD120150)
Development of computer interface simulation platform for bone injury analysis
Completed 2016
6 Supervisor
Ahmad Fuad Bin Mat Yusoff (AD120031)
Finite element fixation model of human knee bone with tendon
Completed 2016
7 Supervisor
Muhammad Dinie Al-Syafiq Bin Radzuan (CD110235)
Simulation of B-pillar in sheet metal forming with different blank materials
Completed 2015
8 Supervisor
Wan Muhamed Akil Bin Che Wahab (CD110378)
Digital reproduction sound of kompang by using digital midi synthesizer
Completed 2015
9 Supervisor
Soh Kai Ying
Finite element analysis of axisymmetric shell structure
Completed 2015
10 Supervisor
Nurul Najwa Binti Ahmad (CD11034)
Boron steel tensile test simulation under preheated environment
Completed 2014
11 Supervisor
Abdul Halim Bin Rasul (Ad100056)
Reproduction off Kompang Sound Using Frequency Data
Completed 2014
12 Supervisor
Muhd Hakeem Bin Ahmad Tajudin (Ad100069)
Performance Analysis of Barbell Bench Press Equipment With Different Angles for Chest Workout
Completed 2014
13 Supervisor
Dayanathan A/L Balakrishnan (CD100066)
Simulation of B-pillar standard benchmark for hot forming sheet metal
Completed 2013
14 Supervisor
Jearron Jackson Akat (DD090106)
Sound Characteristics Assessment Of The Acoustic Guitar String
Completed 2013
15 Supervisor
Sheikh Abdul Hadi Bin Sheikh Abd Kadir
Improvement Of Projectile Motion Equipment
Completed 2013
16 Supervisor
Sham Tsae Yun
MODELING AND SAFETY ANALYSIS OF MALAYSIAN RAILWAY TRACK
Completed 2012
17 Supervisor
Tan Kang Teng
IMPACT ANAYLSIS AND MODIFICATION OF FRONT INNER BUMPER FOR SEDAN
Completed 2012
18 Supervisor
AbdulHafedh Abdulrab Sharaf Al-Ahdal
Noise Cancellation of Frequencies Produced by Band-saw Metal Cutting Machine
Completed 2012
19 Supervisor
TAN CHUN HAW
INVESTIGATION OF TWO CARS HEAD ON COLLISION
Completed 2012
20 Supervisor
TUNG HENG GIAP
INVESTIGATION OR REAR END CRASH ON MALAYSIAN CAR
Completed 2012
21 Supervisor
PEROWANSA PARUKA
DEVELOPMENT OF IMPACT TESTING MACHINE AND SIMULATION
Completed 2012
22 Supervisor
Ling How Hua
Sound Characteristics of Traditional Musical Instrument Kompang
Completed 2012
23 Supervisor
Christopher Gabriel Swyny
Development of GiD to FEBio Interface for biomechanics analysis
Completed 2012
24 Supervisor
Khamarul Ashraaf Bin Arif
Sound Characteristics of Kompang with X-Ray Film Membrane
Completed 2012
25 Supervisor
CHONG SZU HUA
MODELLING AND SAFETY ANALYSIS OF MALAYSIAN RAILWAY TRACK
Completed 2011
26 Supervisor
Shamsir Bin Shukri
Investigation of the Metal Cross Section Profiles of Front Bumper Attachment
Completed 2010
27 Supervisor
Chin Yoong Woon
Development of Natural Frequency Platform by Using Finite Element Method
Completed 2010
28 Supervisor
Chan Choon Kit
Development of Stress Analysis Program for Tensile Test of Plate With Hole
Completed 2010
29 Supervisor
Rodzilla Yahya Sharafuddin
High Speed Impact Characteristics of Plastics
Completed 2010
30 Supervisor
CHIN CHAI YOON
COMPUTATIONAL MODELING OF HIP JOINT WITH MUDCLES
Completed 2010
31 Supervisor
SITI HAMIDAH BINTI MOHAMAD HAIRI
DEVELOPMENT OF MALAYSIAN FEMALE ADULT 50TH PERCENTILE CRASH DUMMY MODEL
Completed 2010
32 Supervisor
Amiruddin Faizal Bin Nekmat
Dynamics response of car passenger on frontal collision
Completed 2009
33 Supervisor
Kamarul Izzadi Bin Kemarudin
Development of mathematical model platform of suspension system of motorcycle
Completed 2009
34 Supervisor
Nik Aida Madiha bt N Zainal Abidin
Experimental Investigation of Drawbeads Geometry to Minimise Springback in Drawing Processes
Completed 2009
35 Supervisor
Nurul Zieyana bt Mohamed Anuar
Improvement of a Portable Water Filter Shell to a New Stronger Design Based on Impact Criterion
Completed 2009
36 Supervisor
Shahrul Effendy Bin Md Yazit
Development of Mini Sled Impact Test System
Completed 2009
37 Supervisor
Siti Mariah Binti Mohamad
Vibration Test System For Electronic Devices
Completed 2009
38 Supervisor
Nur Hasalli Binti Hj Ibrahim
Development of Computational Motorcycle and Rider to Investigate Crash Behaviors on Collision
Completed 2009
39 Supervisor
Dayang Nurul Hafizawaty Bt Abang Ali
Experimental Safety Investigation of Children Helmet on a Mini Sled Test
Completed 2009
40 Supervisor
Siti Khadijah Bte Mohd Borhan
Numerical Simulation on Children Helmet Test
Completed 2009
41 Supervisor
Tan Kang Yao
Crash Investigation of Cushion Barrier Using Finite Element Method
Completed 2009
42 Supervisor
Lina Tam
Sound Characteristics of Traditional Musical Instrument Angklung
Completed 2009
43 Supervisor
Desmond Choo Wan Keong
Computational Model of Cushion Barrier to Investigate the Crash Performance
Completed 2009
44 Supervisor
Jeevana Jothi A/P Ramakrisna
Fatigue Vibration Monitoring using Laser Doppler For Dissimilar Joint Material
Completed 2008
45 Supervisor
Nor Assikin Bte Khamis
Computational Investigation of Drawbeads Geometry to Minimise Springback in Sheet Metal Forming
Completed 2008
46 Supervisor
Annevella Anak Mathew
Influence of Drawbeads on the Springback Behaviour of NUMISHEET 2008
Completed 2008
47 Supervisor
Maryani Muchtar
Dynamic Analysis of Mechanical Biped Robotic System
Completed 2008

D. COMMUNITY AND PROFESSIONAL SERVICES


-- (Empty) The database for community and professional services in not available yet --

 


E. AWARDS


Awards

Displaying 9 results.
Enter a comma separated list of user names.
Achievement Recognition
No Achievement Information Category Year
1 Anugerah PnP Cemerlang FKMP UTHM, Sem 1 Sesi 2013-2014
Universiti Tun Hussein Onn Malaysia (UTHM)
University 2014
2 Anugerah PnP Cemerlang FKMP UTHM, Sem 2 Sesi 2012-2013
Universiti Tun Hussein Onn Malaysia (UTHM)
University 2014
3 Achieving 25 documents publications in SCOPUS
Universiti Tun Hussein Onn Malaysia (UTHM)
University 2014
4 Anugerah Perkhidmatan Cemerlang (Outstanding Staff)
Universiti Tun Hussein Onn Malaysia (UTHM)
University 2010
Award
No Achievement Information Category Year
1 Anugerah Buku Terbaik Kategori Sains Teknologi dan Kejuruteraan
Project leader Scientific Book Writing Using LyX a Front-end of LaTeX
Hadiah Penghargaan
Universiti Tun Hussein Onn Malaysia (UTHM)
University 2012
2 Anugerah Buku Terbaik Kategori Sains Teknologi dan Kejuruteraan
Project leader Principles of Engineering Dynamics Concise Theory and Applications
Hadiah Pertama
Universiti Tun Hussein Onn Malaysia (UTHM)
University 2010
3 International Invention Innovation and Technology Exhibition (ITEX2010)
Project leader Graphical user interface GiD to Impact
Silver medal
International 2010
4 Anugerah Buku Terlaris Kategori Sains Teknologi dan Kejuruteraan
Project leader Principles of Engineering Dynamics Concise Theory and Applications
Hadiah Kedua
Universiti Tun Hussein Onn Malaysia (UTHM)
University 2010
5 International Invention Innovation and Technology Exhibition (ITEX2010)
Project leader Computational Model of Motorcycle and Rider
Bronze medal
International 2010

F. WORKING EXPERIENCE


Management

Displaying 26 records
Enter a comma separated list of user names.
Universiti Tun Hussein Onn Malaysia (UTHM)
No Assignment Post Assignment Information
1 Course Coordinator Course Coordinator BDC40303 Kinematics Mechanism, Sem 1 2016-2017,
(4/9/2016 - Date 14/1/2017)
2 Course Coordinator Course Coordinator BDC40303 Kinematics Mechanism, Sem 2 2015-2016,
(22/2/2016 - Date 2/7/2016)
3 Head Research Group Head Research Group Sports Advancement and Biomechanics Research Group (SPEAR),
(1/1/2016 - Date 31/12/2016)
4 Head Sector Task FKMP Head Sector Task FKMP Database system for Faculty Mechanical and Manufacturing Engineering,
(1/1/2016 - Date 31/12/2016)
5 Course Coordinator Course Coordinator BDC40303 Kinematics Mechanism, Sem 1 2015-2016,
(6/9/2015 - Date 16/1/2016)
6 Course Coordinator Course Coordinator BDC40303 Kinematics Mechanism, Sem 2 2014-2015,
(1/2/2015 - Date 20/7/2015)
7 Course Coordinator Course Coordinator BDC40303 Kinematics Mechanism, Sem 1 2014-2015,
(1/9/2014 - Date 20/1/2015)
8 Course Coordinator Course Coordinator BDA34003, Engineering Mathematics 4, Sem 1 2014-2015,
(1/9/2014 - Date 20/1/2015)
9 Course Coordinator Course Coordinator BDC40303 Kinematics Mechanism, Sem 2 2013-2014,
(1/2/2014 - Date 10/7/2014)
10 Course Coordinator Course Coordinator BDC40303 Kinematics Mechanism, Sem 1 2013-2014,
(1/9/2013 - Date 1/1/2014)
11 Course Coordinator Course Coordinator BDA34003 Engineering Mathematics 4, Sem 1 2013-2014,
(1/9/2013 - Date 20/1/2014)
12 Course Coordinator Course Coordinator BDC4043 Kinematics Mechanism, Sem 2 2012-2013,
(22/2/2013 - Date 2/7/2013)
13 Course Coordinator Course Coordinator BDA20103, Dynamics, Sem 2 2011-2012,
(1/2/2012 - Date 20/7/2012)
14 Head of Panel Head of Panel Department of Engineering Mechanics, Faculty of Mechanical and Manufacturing Engineering,
(1/1/2012 - Date 30/12/2012)
15 Course Coordinator Course Coordinator BDA20303, Mechanics of Machines, Sem 1 2011-2012,
(1/9/2011 - Date 20/1/2012)
16 Course Coordinator Course Coordinator BDA4033, Finite Element Method, Sem2 2010-2011,
(1/2/2011 - Date 20/7/2011)
17 Course Coordinator Course Coordinator BDA4033, Finite Element Method, Sem 1 2010-2011,
(1/9/2010 - Date 20/1/2011)
18 Course Coordinator Course Coordinator BDA4033, Finite Element Method, Sem 2 2009-2010,
(1/2/2010 - Date 20/7/2010)
19 Course Coordinator Course Coordinator BDA4033, Finite Element Method, Sem 1 2009-2010,
(1/9/2009 - Date 20/1/2010)
Universitas Muhammadiyah Surakarta, Indonesia
No Assignment Post Assignment Information
1 Vice Rector Vice Rector Students and Alumni Division,
(17/10/2005 - Date 1/11/2007)
2 Vice Rector Vice Rector Information Technology and Quality Assurance Division,
(23/3/2005 - Date 17/10/2005)
3 Dean Dean Faculty of Engineering,
(7/1/2002 - Date 7/1/2005)
Universitas Muhammadiyah Surakarta
No Assignment Post Assignment Information
1 Head of Laboratory Head of Laboratory Computer Aided Design CATIA Laboratory,
(8/1/2001 - Date 8/10/2001)
Directorate of Higher Education, Indonesian Ministry of Education
No Assignment Post Assignment Information
1 Director Director Technological and Professional Skill Development Project (TPSDP) at Universitas Muhammadiyah Surakarta,
(6/10/2001 - Date 6/1/2002)
Autobody Manufacturing PT New Armada, Magelang, Indonesia
No Assignment Post Assignment Information
1 Manager Manager Engineering and Workshop Division,
(1/11/1996 - Date 1/2/1997)
2 Manager Manager Engineering Division,
(1/5/1996 - Date 1/10/1996)

Other Assignments

Displaying 40 records
Enter a comma separated list of user names.
University of Malaya
No Assignment Description
1 Master or PhD Examiner Master - Tayebeh Kiumarsi RGI110009 Sem 1 2014-2015 ,
(25/3/2015 - Date 25/3/2015)
Universiti Tun Hussein Onn Malaysia (UTHM)
No Assignment Description
1 Developer and maintainer FKMP database http://fkmp.uthm.edu.my/RIDC ,
(1/2/2016 - Current )
2 Conference Technical Committee International Conference on Computational Dynamics in Research and Industry (CFDRI2017) Songkhla, Thailand ,
(3/8/2017 - Date 4/8/2017)
3 Conference Technical Committee International Summit of Knowledge Advancements (ISKA2017) M-Suites Hotel, Johor Bahru, Malaysia ,
(26/7/2017 - Date 27/7/2017)
4 Conference Technical Committee International Research and Innovation Summit (IRIS2017) Melaka, Malaysia ,
(6/5/2017 - Date 7/5/2017)
5 Conference Technical Committee Colloquium on Advanced Mechanics (CAMS2016) UTHM, Malaysia ,
(18/12/2016 - Date 18/12/2016)
6 Pegawai Pengiring MAJLIS KONVOKESYEN KE.16 UNIVERSITI TUN HUSSEIN ONN MALAYSIA ,
(8/10/2016 - Date 10/10/2016)
7 Developer and maintainer ICME2016 Online Submission System http://fkmp.uthm.edu.my/icme2016 ,
(1/2/2016 - Date 3/8/2016)
8 Conference Technical Committee 7th International Conference on Mechanical and Manufacturing Engineering (ICME2016) Jogjakarta, Indonesia ,
(1/8/2016 - Date 3/8/2016)
9 Conference Paper Reviewer 7th International conference on Mechanical and Manufacturing Engineering 2016 (ICME2016) Jogjakarta, Indonesia ,
(1/8/2016 - Date 3/8/2016)
10 Conference Technical Committee 7th International conference on Mechanical and Manufacturing Engineering 2016 (ICME2016) Jogjakarta, Indonesia ,
(1/8/2016 - Date 3/8/2016)
11 Master or PhD Examiner Master - Mathan A/L Sambu - Sem 2 2015-2016 ,
(31/5/2016 - Date 31/5/2016)
12 Final Year Project 2 Panel Examiner Sem 2 2015-2016 ,
(29/5/2016 - Date 30/5/2016)
13 Final Year Project 2 Panel Examiner Sem 1 2015-2016 ,
(20/12/2015 - Date 22/12/2015)
14 Final Year Project 1 Panel Examiner Sem 1 2015-2016 ,
(13/12/2015 - Date 15/12/2015)
15 Master or PhD Viva Chairman Master - Mohd Khairul Zainy bin Abd Gani - Sem 1 2015-2016 ,
(25/10/2015 - Date 25/10/2015)
16 Conference Technical Committee 6th International conference on Mechanical and Manufacturing Engineering 2015 (ICME2015) Universiti Tun Hussein Onn Malaysia ,
(19/10/2015 - Date 20/10/2015)
17 Conference Reviewer Malaysian Technical Universities Conference on Engineering and Technology (MUCET2015) Johor Bahru ,
(11/10/2015 - Date 13/10/2015)
18 Conference Presentation Judge Malaysian Technical Universities Conference on Engineering and Technology (MUCET2015) Johor Bahru, Malaysia ,
(11/10/2015 - Date 13/10/2015)
19 Conference Vice Director or Vice Chairman 5th International conference on Mechanical and Manufacturing Engineering 2014 (ICME2014) Bandung, Indonesia ,
(29/10/2014 - Date 30/10/2014)
20 Conference Paper Reviewer 5th International conference on Mechanical and Manufacturing Engineering 2014 (ICME2014) Bandung, Indonesia ,
(29/10/2014 - Date 30/10/2014)
21 Conference Technical Committee 4th International conference on Mechanical and Manufacturing Engineering 2013 (ICME2013) Bangi, Malaysia ,
(17/12/2013 - Date 18/12/2013)
22 Conference Technical Committee 3th International conference on Mechanical and Manufacturing Engineering 2012 (ICME2012) UTHM Library, Malaysia ,
(20/12/2012 - Date 21/12/2012)
23 Master or PhD Examiner Master - Abdlmanan S.A. Elmaryami - Sem 2 2009-2010 ,
(10/6/2010 - Date 10/6/2010)
Universiti Putra Malaysia (UPM)
No Assignment Description
1 Master or PhD Examiner Master - Wong Choon Yap - Sem 2 2008-2009 ,
(10/10/2009 - Date 10/10/2009)
Universitas Muhammadiyah Surakarta (UMS)
No Assignment Description
1 Conference Keynote Speaker International Conference on Engineering and Industrial Application (ICETIA2014) Surakarta ,
(4/12/2014 - Date 4/12/2014)
UcMM Konsortium
No Assignment Description
1 Conference Paper Reviewer International Summit of Knowledge Advancements (ISKA2017) M-Suites Hotel, Johor Bahru, Malaysia ,
(26/7/2017 - Date 27/7/2017)
SMath Studio, http://smath.info/translator/
No Assignment Description
1 User Interface Translator Mathematical program with WYSIWYG editor ,
(1/1/2010 - Current )
Politeknik Ibrahim Sultan
No Assignment Description
1 Workshop Trainer Conference Database, Johor bahru,
(15/9/2014 - Date 15/9/2014)
Pertanika Journal
No Assignment Description
1 Journal Reviewer Pertanika Journal of Science & Technology (JST) ,
(1/4/2015 - Current )
MEST
No Assignment Description
1 Conference Keynote Speaker Mechanical Engineering Science and Technology International Conference (MEST2017) Politeknik Metro, Johor Bahru ,
(19/4/2007 - Date 20/4/2017)
2 Conference Paper Reviewer Mechanical Engineering Science and Technology International Conference (MEST2017) Politeknik Metro, Johor Bahru ,
(19/4/2017 - Date 20/4/2017)
LyX Document Processor https://www.lyx.org/I18n
No Assignment Description
1 User Interface Translator Bahasa Indonesia Interface ,
(1/1/2009 - Current )
Kingston University, London, United Kingdom
No Assignment Description
1 Contract Academic Staff Collaboration UMS and Kingston Univ ,
(1/11/2006 - Date 30/12/2006)
International Association of Computer Science and Information Technology (IACSIT)
No Assignment Description
1 Journal Editor International Journal of Materials, Mechanics and Manufacturing ,
(1/1/2014 - Current )
International Academy of Computer Technology
No Assignment Description
1 Conference Technical Committee 2015 2nd International Conference on Mechatronics, Materials and Manufacturing Paris, France ,
(3/8/2015 - Date 4/8/2015)
Impact Finite Element Program Suite
No Assignment Description
1 Developer and maintainer GiD to Impact Finite Element Program Interface http://www.impact-fem.org/dev_impact_en ,
(15/5/2009 - Current )
ICMEAS2015
No Assignment Description
1 Conference Technical Committee International Conference on Mechanical Engineering and Automation Science (ICMEAS2015) Hong Kong ,
(24/10/2015 - Date 25/10/2015)
Canadian Center of Science and Education
No Assignment Description
1 Journal Editor Mechanical Engineering Research ,
(1/1/2012 - Current )
Aeronatical and Maritime Research Laboratory (AMRL), Defence Science and Technology Office (DSTO). Dept of Defense, Australia
No Assignment Description
1 Structural Dynamics Engineer Fighter Jet Ground Vibration Test ,
(1/6/1998 - Date 30/11/1998)

G. TEACHING EXPERIENCE


Teaching Experience

Displaying 88 records
Enter a comma separated list of user names.
Employer: Universitas Muhammadiyah Kalimantan Timur (UMKT)
No Session Course
1 Bachelor Sem 2 2018-2019
Dasar Pemgrograman Komputer (TME2123)
Employer: Other
No Session Course
1 Universitas Muhammadiyah Surakarta (UMS) Bachelor Sem 2 2018-2019
Dasar Pemgrograman Komputer (MEN40932)
2 Universitas Muhammadiyah Surakarta (UMS) Bachelor Sem 2 2018-2019
Finite Element Methods (MEN70843)
3 Universitas Muhammadiyah Surakarta (UMS) Bachelor Sem 2 2018-2019
Numerical Methods (MEN40334)
4 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 2 2016-2017
Engineering Mathematics 4 (BDA34003)
5 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 2 2016-2017
Finite Element Methods (BDA31003)
6 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 1 2016-2017
Kinematics Mechanism (BDC40303)
7 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 1 2016-2017
Engineering Mathematics 4 (BDA34003)
8 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 2 2015-2016
Finite Element Methods (BDA31003)
9 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 2 2015-2016
Kinematics Mechanism (BDC40303)
10 Universiti Tun Hussein Onn Malaysia (UTHM) Master Sem 2 2015-2016
Advanced Engineering Mathematics (MDC10103)
11 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 1 2015-2016
Finite Element Methods (BDA31003)
12 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 1 2015-2016
Kinematics Mechanism (BDC40303)
13 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 3 2014-2015
Engineering Mathematics 4 (BDA34003)
14 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 2 2014-2015
Kinematics Mechanism (BDC40303)
15 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 2 2014-2015
Finite Element Methods (BDA31003)
16 Universiti Tun Hussein Onn Malaysia (UTHM) Master Sem 2 2014-2015
Advanced Mechanisms and Machines (MDM10704)
17 Universiti Tun Hussein Onn Malaysia (UTHM) Master Sem 1 2014-2015
Advanced Engineering Mathematics (MDC10103)
18 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 1 2014-2015
Engineering Mathematics 4 (BDA34003)
19 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 1 2014-2015
Kinematics Mechanism (BDC40303)
20 Universiti Tun Hussein Onn Malaysia (UTHM) Master Sem 2 2013-2014
Advanced Mechanisms and Machines (MDM10704)
21 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 2 2013-2014
Kinematics Mechanism (BDC40303)
22 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 1 2013-2014
Engineering Mathematics 4 (BDA34003)
23 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 1 2013-2014
Kinematics Mechanism (BDC40303)
24 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 1 2013-2014
Finite Element Methods (BDA40303)
25 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 2 2012-2013
Engineering Mathematics 4 (BWM30603)
26 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 2 2012-2013
Kinematics Mechanism (BDC4043)
27 Universiti Tun Hussein Onn Malaysia (UTHM) Master Sem 2 2012-2013
Product Lifecycle Management (MDM10904)
28 Universiti Tun Hussein Onn Malaysia (UTHM) Master Sem 2 2012-2013
Advanced Engineering Mathematics (MDC10103)
29 Universiti Tun Hussein Onn Malaysia (UTHM) Master Sem 1 2012-2013
Modelling and Simulation (MDC10203)
30 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 1 2012-2013
Engineering Mathematics 4 (BWM30603)
31 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 1 2012-2013
Finite Element Methods (BDA4033)
32 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 2 2011-2012
Dynamics (BDA20103)
33 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 1 2011-2012
Mechanics of Machines (BDA20303)
34 Universiti Tun Hussein Onn Malaysia (UTHM) Master Sem 1 2011-2012
Modelling and Simulation (MKM1803)
35 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 1 2011-2012
Solid Mechanics 2 (BDA30303)
36 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 1 2011-2012
Solid Mechanics 1 (BDA10402)
37 Universiti Tun Hussein Onn Malaysia (UTHM) Master Sem 1 2011-2012
Elasticity (MDM10203)
38 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 3 2010-2011
Finite Element Methods (BDA4033)
39 Universiti Tun Hussein Onn Malaysia (UTHM) Master Sem 2 2010-2011
Modelling and Simulation (MDC10203)
40 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 2 2010-2011
Finite Element Methods (BDA4033)
41 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 2 2010-2011
Dynamics (BDA20103)
42 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 1 2010-2011
Dynamics (BDA2013)
43 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 1 2010-2011
Finite Element Methods (BDA4033)
44 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 2 2009-2010
Noise and Vibration (BDC4013)
45 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 2 2009-2010
Mechanics of Machines (BDA2033)
46 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 2 2009-2010
Dynamics (BDA2013)
47 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 1 2009-2010
Noise and Vibration (BDC4013)
48 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 1 2009-2010
Dynamics (BDA2013)
49 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 1 2009-2010
Finite Element Methods (BDA4033)
50 Universiti Tun Hussein Onn Malaysia (UTHM) Diploma Sem 2 2008-2009
Dynamics (DDA2063)
51 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 1 2008-2009
Noise and Vibration (BDC4013)
52 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 1 2008-2009
Dynamics (BDA2013)
53 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor Sem 2 2007-2008
Dynamics (BDA2013)
54 Universitas Muhammadiyah Surakarta Bachelor Sem 1 2007-2008
Finite Element Methods
55 Universitas Muhammadiyah Surakarta Bachelor Sem 1 2007-2008
Aerodynamics
56 Universitas Muhammadiyah Surakarta Master Sem 1 2007-2008
Operations Management
57 Universitas Muhammadiyah Surakarta Bachelor Sem 2 2006-2007
Finite Element Methods
58 Universitas Muhammadiyah Surakarta Bachelor Sem 2 2006-2007
Aerodynamics
59 Universitas Muhammadiyah Surakarta Master Sem 2 2006-2007
Operations Management
60 Universitas Muhammadiyah Surakarta Bachelor Sem 1 2006-2007
Finite Element Methods
61 Universitas Muhammadiyah Surakarta Master Sem 1 2006-2007
Operations Management
62 Universitas Muhammadiyah Surakarta Bachelor Sem 2 2005-2006
Aerodynamics
63 Universitas Muhammadiyah Surakarta Master Sem 2 2005-2006
Operations Management
64 Universitas Muhammadiyah Surakarta Bachelor Sem 1 2005-2006
Finite Element Methods
65 Universitas Muhammadiyah Surakarta Master Sem 1 2005-2006
Operations Management
66 Universitas Muhammadiyah Surakarta Bachelor Sem 2 2004-2005
Aerodynamics
67 Universitas Muhammadiyah Surakarta Master Sem 2 2004-2005
Operations Management
68 Universitas Muhammadiyah Surakarta Bachelor Sem 1 2004-2005
Engineering Dynamics
69 Universitas Muhammadiyah Surakarta Bachelor Sem 1 2004-2005
Finite Element Methods
70 Universitas Muhammadiyah Surakarta Master Sem 1 2004-2005
Operations Management
71 Universitas Muhammadiyah Surakarta Bachelor Sem 2 2003-2004
Mechanical Vibrations
72 Universitas Muhammadiyah Surakarta Bachelor Sem 2 2003-2004
Aerodynamics
73 Universitas Muhammadiyah Surakarta Master Sem 2 2003-2004
Operations Management
74 Universitas Muhammadiyah Surakarta Bachelor Sem 1 2003-2004
Engineering Dynamics
75 Universitas Muhammadiyah Surakarta Bachelor Sem 1 2003-2004
Finite Element Methods
76 Universitas Muhammadiyah Surakarta Bachelor Sem 2 2002-2003
Mechanical Vibrations
77 Universitas Muhammadiyah Surakarta Bachelor Sem 2 2002-2003
Aerodynamics
78 Universitas Muhammadiyah Surakarta Bachelor Sem 1 2002-2003
Engineering Dynamics
79 Universitas Muhammadiyah Surakarta Bachelor Sem 1 2002-2003
Finite Element Methods
80 Universitas Muhammadiyah Surakarta Bachelor Sem 2 2001-2002
Mechanical Vibrations
81 Universitas Muhammadiyah Surakarta Bachelor Sem 1 2001-2002
Engineering Dynamics
82 Universitas Muhammadiyah Surakarta Bachelor Sem 1 2001-2002
Finite Element Methods
83 Universitas Muhammadiyah Surakarta Bachelor Sem 1 2001-2002
Production Management
84 Universitas Muhammadiyah Surakarta Bachelor Sem 2 2000-2001
Aerodynamics
85 Universitas Muhammadiyah Surakarta Bachelor Sem 2 2000-2001
Mechanical Vibrations
86 Universitas Muhammadiyah Surakarta Bachelor Sem 1 2000-2001
Calculus 3
87 Universitas Muhammadiyah Surakarta Bachelor Sem 1 2000-2001
Engineering Dynamics

H. ATTENDED COURSES


Attended Courses

Enter a comma separated list of user names.

No attended course records found.